*Please do not touch the rotating rollers as it may cause injury.

*During use, the device may become hot. Please be cautious of burns. Additionally, theres a risk of deformation of resin parts due to heat. Its advisable to occasionally allow it to cool down during use.

*After use, loosen the star drag and store the device only after it has cooled down completely.

*When attached to a table or similar surface, be aware that rubber marks may be left behind.

*The displayed tension values are approximate estimates.

*If you find that the tension is not applied properly when the line is inserted into the tensioner with almost no tension on the spooled line, adjustments may be necessary.

*For lines with low friction coefficients, such as coated lines, the tension roller may slip or spin freely. In such cases, loosening the tension slightly on the slipping side and tightening it on the opposite side may help.

*Utilizing the "High-Speed Recycler 2.0" (sold separately) or similar devices to apply approximately 1 kg of tension while inserting the line into the tensioner can be effective.

*Please understand that urethane rubber rings and carbon drag washers are consumable parts. Using worn urethane rubber rings may damage the line and lead to breakage. Please inspect the condition of the urethane rubber rings before use.

*For detailed information on purchasing parts, please refer to the "Parts & Repair" section on our website.

*To minimize significant damage to the urethane rubber rings, aim for a tension of approximately 50% to 60% of the lines rating in kilograms.